Skip to content

Rockford Fosgate Two Punch P3 12" Subwoofers in a Ported Enclosure with a Punch Series P1000X1bd Amplifier

Save 39%
Original Price $1,900.00
Current Price $1,159.98
Availability: Translation missing: en.general.icons.icon_check_circle icon 299 in stock, ready to be shipped

Notify me when back in stock

Rockford Fosgate Two Punch P3 12" Subwoofers in a Ported Enclosure with a Punch Series P1000X1bd Amplifier

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers.

General Features:

  • Punch BD Series Monoblock Class BD Car Amplifier
  • RMS Power Rating:
  • 4 ohms: 300 watts x 1 channel
  • 2 ohms: 500 watts x 1 channel
  • 1 ohm: 1000 watts x 1 channel
  • CEA-2006 compliant amplifier
  • Features C.L.E.A.N. Set-up with the 10-step set-up procedure
  • w/ input/output clip detection and indicator LEDs
  • MOSFET power supply
  • Muted turn on
  • Cast aluminum heatsink
  • 12dB/octave Butterworth crossover
  • Stealth top-mounted control panel
  • LED power, thermal, and protection indicators
  • Nickel-plated captive C-clamp terminals
  • Ultra-efficient Class BD circuitry to maximize amplifier power efficiency
  • On-board differential inputs eliminate noise picked up by the signal cable
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
  • MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
  • Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
  • Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low
  • DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
  • Input sensitivity: 150mV - 12V
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Variable low-pass filter: 50-250 Hz
  • Selectable infrasonic filter: off / 28 Hz
  • Frequency response: 20 - 250 Hz
  • Total Harmonic Distortion: <1.0%
  • Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H
  • 8 AWG to 18 AWG speaker wire output terminals
  • 4 gauge power and ground wiring is recommended for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

What is in the P1000X1bd package:

  • P1000X1bd owner's manual
  • Mono subwoofer amplifier
  • Four 1-1/2" Self-tapping screws
  • 5mm Allen wrench
  • Quick setup instructions

Rockford Fosgate P3-2X12 Punch Dual P3 12" Loaded Enclosure Ported Subwoofer

The P3-2X12 is a dual P3 12” vented enclosure with 1200 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals.

General Features:

Subwoofer Features:

  • 12" Punch P3 Series Subwoofers
  • Power Handling:
  • Peak: 2400 watts
  • RMS: 1200 watts
  • Recommended power range: 600 - 1400 watts RMS @ 1 ohm
  • CEA-2031 Compliant
  • Klippel Verified
  • Flex-fit Mounting pattern
  • Proprietary spider venting/cooling technique
  • StampCast basket with integrated spider venting
  • Sturdy 16 gauge compound bend frame geometry
  • High modulus Kevlar re-inforced paper-pulp cone
  • Semi-flexible, PVC removable protective motor cover
  • Multi-point high-temp/high-strength neck joint bonding technique
  • Tall-profile VAST Santoprene surround for a larger surface area
  • Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
  • Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
  • Proprietary all metal, radially oriented compression input terminal assembly
  • Optimized motor magnetics with extended pole and bumped vented backplate
  • High temp 2.5" voice coil w/ spun-laced Nome insulating reinforcement collar
  • Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
  • Magnet Weight: 96 oz
  • Frequency Response: 27.7 - 250 Hz
  • Xmax: 15.9mm
  • Sensitivity: 85 dB @ 1 watt / 1 meter
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Enclosure Features:

  • Dual Punch P3 12" Loaded Subwoofer Enclosure
  • Constructed with durable 5/8" MDF
  • High current binding posts
  • Proprietary high-flow, low-noise port
  • Durable black carpet covering
  • Computer-optimized design
  • Final Impedance: 1 ohm
  • Dimensions: 15-3/4”D x 33-7/8”W x 15-1/8”H
  • Shipping Weight: 89.65 Lbs. (40.66 kg)

⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.