Skip to content
Audio-Technica AT2035 Bundle Cardioid Condenser Microphone Bundle with Pop Filter with 2 Layered Mesh and 10-foot XLR Cable

Audio-Technica AT2035 Bundle Cardioid Condenser Microphone Bundle with Pop Filter with 2 Layered Mesh and 10-foot XLR Cable

by Audio-Technica
Save 32%
$250.00
$169.99
Availability: Translation missing: en.general.icons.icon_check_circle icon Only 20 left!

Notify me when back in stock

Audio-Technica AT2035 Bundle Cardioid Condenser Microphone Bundle with Pop Filter with 2 Layered Mesh and 10-foot XLR Cable

The AT2035 Cardioid Condenser Microphone Bundle from Audio-Technica features a side-address design and can be used in the critical home, project, or professional studio applications as well as live performances. The microphone offers a cardioid polar pattern for minimal feedback and off-axis noise. The element and output stage combine to produce a smooth yet natural audio quality with low noise. There is an 80 Hz high-pass filter switch for eliminating low-frequency hum and other associated noises, and a -10 dB pad switch provides more headroom when capturing transient signals that may otherwise cause peak distortion. The microphone also includes a threaded adapter, and a protective pouch, Pop filter, and an XLR-XLR Cable

General Features:

  • Designed for critical home/project/professional studio applications and live performance
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
  • Large-diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide excellent versatility
  • Custom shock mount provides superior isolation
  • Features switchable 80 Hertz high pass filter and 10 dB pad
  • Large-diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar pattern: Cardioid
  • Frequency response: 20Hz-20kHz
  • Low-frequency roll-off: 80Hz, 12dB/octave
  • Impedance: 120 ohms
  • Maximum input sound level: 148dB SPL, 1kHz at 1% T.H.D.; 158dB SPL, with 10dB pad (nominal)
  • Switches: Flat, roll-off; 10dB pad
  • Weight: 14.2 oz
  • Output connector: Integral 3-pin XLRM-type
  • Accessories: Shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
  • Requires +48V phantom power
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
  • Large-diaphragm for smooth, natural sound and low noise
  • Pop Filter to eliminate the annoying "plosives" from your recordings
  • 10ft. XLR Cable to connect the mic to your mixer or interface
  • Microfiber Cleaning Cloth

⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov