Skip to content

Alpine PSS-23WRA Powered Subwoofer Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited

by Alpine
Save 22%
Original Price $1,800.00
Current Price $1,399.95
Availability: Translation missing: en.general.icons.icon_check_circle icon Only 11 left!

Notify me when back in stock

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited

Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL

TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORY
Enjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.

SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFF
The PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. The subwoofer includes a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off.

EASY BOLT-IN INSTALLATION
The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.

SIMPLE TWEETER REPLACEMENT
The SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.

WORKS WITH ANY RADIO
The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios.

General Features:

  • Complete Direct Fit Audio System Upgrade
  • Compatible with 2018 - Up Jeep Wrangler Unlimited JL
  • Compatible with models that don't have a factory-amplified system
  • All installation hardware, such as speaker adapters and amplifier wiring, included
  • CEA-2006 Compliant System
  • 300 Watt RMS sound system
  • The system consists of:
    • 8" Powered Subwoofer
    • Universal Power Pack Amplifier
    • 2" Component Tweeters
    • Tweeter Adapters
  • Authorized Dealer
  • 1-year Manufacturer's Warranty

PWE-S8 Subwoofer Features:

  • Peak: 240 watts
  • RMS: 120 watts
  • 8" woofer high-excursion cone
  • built-in Class D amplifier
  • frequency response: 32-150 Hz
  • variable low-pass crossover (80-200 Hz)
  • variable phase control (0-180 degrees)
  • preamp- and speaker-level inputs
  • Dimensions: 13-1/2"W x 3"D x 9"H

KTP-445U Amplifier Features:

  • RMS Power Rating:
    • 4 ohms: 45 watts x 4 Channel
    • 2 ohms: 45 watts x 4 Channel
    • 4 ohms: 90 watts x 2 Channel (Bridged)
  • Total RMS power output: 180 watts
  • CEA-2006 compliant amplifier
  • Increases the output of any head unit without having to install a full-size amplifier and amp install kit
  • The Independent front/Rear gain switch is adjustable from high to low
  • Runs off the receiver's power circuit
  • High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave
  • Fast and simple installation
  • 4-channel operation for four speakers
  • Minimum impedance of 2 ohms
  • Frequency response: 20-20,000 Hz
  • Fuse Rating: 15A x 1

SPR-10TW Component Tweeters:

  • 2" Type-R Series Car Tweeters
  • Power Handling:
    • Peak: 450 watts per pair / 225 watts each
    • RMS: 150 watts per pair / 75 watts each
  • Silk Dome tweeter construction
  • 4 ohms impedance
  • Copper-Clad Aluminum high-temperature voice coil
  • 75% smaller external crossover filter removes harmful frequencies
  • 4-way tweeter level attenuation
  • High-grade Neodymium magnet structure
  • Surface / Bottom / Flush Mountable
  • CEA-2031 compliant speakers
  • Sensitivity: 88dB
  • Frequency response: 1,000-29,000 Hz
  • Top-mount depth: 11/16"

Vehicle Compatibility:

  • JEEP
    • 2018 - Up Wrangler Unlimited JL

Compatible with Wrangler JL Models that don't have a factory amplified system

What's in the PSS-23WRA package:

  • KTP-445U amplifier
  • PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket)
  • 7' Signal harness
  • 12' Loomed power wire w/ inline 20A fuse
  • 52-Pin t-harness
  • Four 10" speaker to RCA harnesses
  • Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers
  • Remote bass-level control w/ attached 16' cable
  • 3" Strip of hook-and-loop fastener
  • Ten 6" wire-ties
  • 1/2" Self-tapping screw
  • Star-washer
  • 2 Alpine logos
  • Installation guide
  • Warranty sheet
  • Alpine PSS-23WRA owner's manual

⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.