Peavey PVXp 10, Bluetooth Powered Loudspeaker - 10-Inch

The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4" inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. Full-coverage heavy-duty perforated steel grilles, with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals.

Product Specifications:

Powered: Yes

Power Configuration: Bi-amped

Channels: 3-channel mixer

LF Driver Size: 10" woofer

HF Driver Size: 1" Compression Driver

LF Driver Power Amp: 400W

HF Driver Power Amp: 120W

Total Power: 520W (peak)

Inputs: 2 x XLR-1/4" combo, 1 x 1/8" TRS

Outputs: 1 x XLR

Bluetooth: Yes (audio in)

Frequency Range: 52Hz-20khz

Frequency Response: 65Hz-20 kHz-(±3 dB)

Crossover Frequency: 24dB/octave @ 2000 Hz

Maximum Peak SPL: 123dB SPL @ 1m

Horizontal Coverage Angle: 100°

Vertical Coverage Angle: 60°

Signal Processing: DSP, 24bit/48kHz

Software: PVXp iOS app

Enclosure Material: Black injection-molded plastic

Mounting Options: Pole, Floor Wedge

Power Source: Standard IEC AC cable

Height: 20"

Width: 12.69"

Depth: 11.06"

Weight: 27 lbs.