Skip to content
2 PVXP12 DSP 12" 980W Powered Speaker 1.4" Driver+ Speaker Stand+ XLR Cable

2 PVXP12 DSP 12" 980W Powered Speaker 1.4" Driver+ Speaker Stand+ XLR Cable

by Peavey
Save 20%
$1,499.00
$1,199.98
Availability: Translation missing: en.general.icons.icon_check_circle icon Only 10 left!

Notify me when back in stock

 

(2) PVXP12 DSP 12 inch Powered Speaker 980W 12" Powered Speaker with 1.4" Compression Driver,+ Mr. Dj Speaker Stands+6 Feet XLR Cable

Peavey PVXp 12 12" 2-Way 980 Watt DSP & Bluetooth Active Powered PA Speaker

PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance.

The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector.

General Features:

  • Two-way bi-amped sound reinforcement enclosure
  • RX14™ compression driver, with a 1.4-inch titanium diaphragm
  • Reliable fan-cooled power amps with DSP protection
  • Total of 980W peak dynamic power
  • DSP control for precise crossover, EQ, and limiting functions
  • Bluetooth® input is via a dedicated input channel
  • Mix/Thru Output is via a male XLR jack
  • Durable plastic injection-molded trapezoidal enclosure
  • The extra angled section on the right side allows floor monitor use
  • Pole mount molded-in for 1 3/8" diameter poles
  • Top, bottom, and right side flying point inserts
  • 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
  • Full-coverage heavy-duty perforated steel grilles with powder coat finish
  • DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision
  • Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage
  • Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads
  • Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
  • Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack
  • Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
  • Packed Weight: 46.97 lb (21.3 kg)
  • Packed Length: 26.75" (67.95 cm)
  • Packed Width: 20" (50.8 cm)
  • Packed Height: 18.25" (46.36 cm)

Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.