Alpine R2-S65C 6.5" Speaker Package With Speaker Adapter and Harness For Select Honda and Acura Vehicles
Alpine R2-S65C Component 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness
Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit, you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.
Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634
Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02B
Vehicle Compatibility:
Acura:
- 2007-2012 RDX - Front And Rear Speaker Locations
- 2009-2013 TL - Front And Rear Speaker Locations
- 2009-2013 TSX - Front And Rear Speaker Locations
- 2008-2012 Accord - Front And Rear Speaker Locations
- 2012-2013 Crosstour - Front And Rear Speaker Locations
- 2010-2011 Accord Crosstour - Front And Rear Speaker Locations
- 2006-2013 Civic - Front And Rear Speaker Locations
- 2012-2013 CR-V - Front And Rear Speaker Locations
- 2011-2013 CR-Z - Front And Rear Speaker Locations
- 2010-2013 Insight - Front And Rear Speaker Locations
- 2011-2013 Odyssey - Front And Rear Speaker Locations
TURN IT UP
- 6.5-inch R-Series Component 2-way Car Speakers
- the component speaker system includes two woofers, 2 tweeters, and 2 external crossovers
- Power Handling:
- Peak: 300 watts
- RMS: 100 watts
- 4 Ohms impedance
- Frequency response: 65Hz-40kHz
- Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology
- CFRP increases the speakers’ mid-bass performance and dynamic range
- CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback
- Patented High-Amplitude Multi-Roll (HAMR) surround for control and accuracy
- Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately)
- It uses an in-line, passive design with a reduced footprint, which also contributes to easier installation
- Authorized Dealer
- 1-year Manufacturer's Warranty
- 2 Woofers
- Two 6-1/2" Adapter rings (includes GM/Chrysler)
- Two 6x8 Adapter rings
- 2 Woofer grilles
- 2 Grille badges
- 2 Tweeters (each has an attached 30" length of wire)
- 2 Tweeter grilles (installed)
- 2 Swivel flush mount housings (with tweeters installed)
- Two crossovers (each has attached input and output wires)
- 2 Flush mount retention rings
- 2 Stealth brackets
- 2 Foam self-adhesive pads
- 2 Foam self-adhesive rings
- Eight 1-1/8" Screws
- Eight 1/2" Screws
- 8 Speed-clips
- Eight M4x12mm Machine screws
- Four 5" Zip ties
- 2 Pieces of two-sided tape
- Warranty information
- Online product registration note
- Important Notice sheet
- Template and specs on the box
- R-S65C.2 owner's manual
Honda Speaker Adapter Kit
- Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
- For Select Acura and Honda models.
- Installs 6 1/2" or 6 3/4" Speakers.
- Dimension: 17"Lx 10"Wx 2"H.
- Weight: 0.3 Lbs.
Speaker Connector Harnesses
- Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
- factory harness without the need to cut or splice the factory wires. It features a high-impact, OEM-quality ABS plastic
- molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
- The precision hand-assembled terminals are pressure-inserted into the plug, making it virtually impossible to pull a wire out.
⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.