Crux SWRTY-61S Radio Replacement w/ SWC Retention for Select Toyota Vehicles 2003-2014

Crux SWRTY-61S Radio Replacement w/ SWC Retention for Select Toyota Vehicles 2003-2014

The CRUX SWRTY-61S is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable the retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for the retention of steering wheel controls.

General Features: 

• Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.
• Pre-programmed to retain factory Steering Wheel Controls.
• iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine, and JVC radios.
• Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
• Supports Pick/End Calls, Pick up and Toggle between 1st and 2nd incoming calls, AVRCP Track, and Seek.
• Retains factory AUX Input.
• EIA color-coded wiring for easy installation.

Note:
This unit Does Not retain a factory JBL amplifier if your vehicle is equipped with a factory JBL amplifier please select SWRTY-61J

Compatibility:

TOYOTA

• 2003 – 2013 4Runner
• 2005 – 2011 Avalon
• 2007 – 2011 Camry
• 2004 – 2008 Camry Solara
• 2007 – 2010 FJ Cruiser
• 2008 – 2012 Highlander
• 2005 – 2011 Matrix
• 2006 – 2011 RAV4
• 2003 – 2011 Sequoia
• 2004 – 2014 Sienna
• 2004 – 2008 Solara
• 2005 – 2012 Tacoma
• 2003 – 2013 Tundra (2013 early production)
• 2009 – 2011 Venza
• 2008 – 2011 Yaris

SCION

• 2005 – 2011 tC
• 2004 – 2007 xA
• 2004 – 2011 xB
• 2008 – 2011 xD

⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.